Tyndall Air Force Base

Sort By

Category

Show Advanced Options

Clear Filters |

Cross Utilization Training and the 43d FGS

U.S. Air Force Senior Airman Alex George, 43d Fighter Generation Squadron dedicated crew chief, poses for a photo at Eglin Air Force Base, Florida, Aug. 4, 2022. George recently completed Cross Utilization Training, where he swapped specialties with another Airman within the squadron to broaden his skillset and contribute to a force of multi-capable Airmen. (U.S. Air Force photo by Airman 1st Class Tiffany Del Oso)

Details Download

Cross Utilization Training and the 43d FGS

U.S. Air Force Senior Airman Alex George, 43d Fighter Generation Squadron dedicated crew chief, reviews maintenance data at Eglin Air Force Base, Florida, Aug. 4, 2022. After any maintenance is completed on an aircraft, the maintainer must log their tasks to keep a record of all maintenance the aircraft has received. (U.S. Air Force photo by Airman 1st Class Tiffany Del Oso)

Details Download

Cross Utilization Training and the 43d FGS

U.S. Airmen assigned to the 43d Fighter Generation Squadron communicate with a flight line expediter at Eglin Air Force Base, Florida, Aug. 4, 2022. After a shift changeover, crew chiefs meet with their flight line expediter to receive their tasks for the day. (U.S. Air Force photo by Airman 1st Class Tiffany Del Oso)

Details Download

Cross Utilization Training and the 43d FGS

U.S. Air Force Senior Airman Alex George, 43d Fighter Generation Squadron dedicated crew chief, removes a bolt from the bottom of an F-22 Raptor at Eglin Air Force Base, Florida, Aug. 4, 2022. Crew chiefs are experienced maintainers who are assigned to individual aircraft and are responsible for maintaining it when it's not in the air. (U.S. Air Force photo by Airman 1st Class Tiffany Del Oso)

Details Download

Cross Utilization Training and the 43d FGS

U.S. Air Force Senior Airman Alex George, 43d Fighter Generation Squadron dedicated crew chief, removes a bolt from the bottom of an F-22 Raptor at Eglin Air Force Base, Florida, Aug. 4, 2022. Crew chiefs are experienced maintainers who are assigned to individual aircraft and are responsible for maintaining it when it's not in the air. (U.S. Air Force photo by Airman 1st Class Tiffany Del Oso)

Details Download

Cross Utilization Training and the 43d FGS

U.S. Air Force Senior Airman Alex George, 43d Fighter Generation Squadron dedicated crew chief, screws a bolt into an F-22 Raptor at Eglin Air Force Base, Florida, Aug. 4, 2022. George recently completed Cross Utilization Training, where he swapped specialties with another Airman within the squadron to broaden his skillset and contribute to a force of multi-capable Airmen. (U.S. Air Force photo by Airman 1st Class Tiffany Del Oso)

Details Download

Cross Utilization Training and the 43d FGS

U.S. Air Force Senior Airman Alex George, 43d Fighter Generation Squadron dedicated crew chief, observes the bottom of an F-22 Raptor at Eglin Air Force Base, Florida, Aug. 4, 2022. Crew chiefs are experienced maintainers who are assigned to individual aircraft and are responsible for maintaining it when it's not in the air. (U.S. Air Force photo by Airman 1st Class Tiffany Del Oso)

Details Download

220616-F-YO405-1010

U.S. Air Force Master Sgt. Jorge Solis, 325th Maintenance Squadron production superintendent, left, discusses the day’s tasks with Airmen with the 325th MXS low observables flight at Tyndall Air Force Base, Florida, June 16, 2022. Members of the production team work to coordinate the combined efforts of maintenance back shops, including nondestructive inspection, aerospace ground equipment and low observables flights. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220616-F-YO405-1005

U.S. Air Force Master Sgt. Jorge Solis, 325th Maintenance Squadron production superintendent, right, discusses the day’s tasks with an Airman with the 325th MXS low observables flight at Tyndall Air Force Base, Florida, June 16, 2022. Solis works in the production side of maintenance fabrication by serving as a cross-shop coordinator, ensuring multiple units are accomplishing the needs of the mission. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1097

U.S. Air Force Airman 1st Class Austin Santrock, 325th Maintenance Squadron nondestructive inspection apprentice, tests a piece of a drone recovery reel at Tyndall Air Force Base, Florida, June 14, 2022. Santrock is using a non-destructive testing scanner to detect cracks inside of the item by emitting a vibration frequency, signaling a faulty asset. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1085

U.S. Air Force Airman 1st Class Austin Santrock, 325th Maintenance Squadron nondestructive inspection apprentice, tests a piece of a drone recovery reel at Tyndall Air Force Base, Florida, June 14, 2022. Santrock is using a non-destructive testing scanner to detect cracks inside of the item by emitting a vibration frequency, signaling a faulty asset. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1084

A non-destructive testing scanner is used by U.S. Airmen with the 325th Maintenance Squadron nondestructive inspection flight to check pieces of drone recovery reels at Tyndall Air Force Base, Florida, June 14, 2022. Airmen with the NDI flight are trained to use NDT scanners to determine if there is a potential safety hazard or if an item is no longer serviceable. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1081

U.S. Air Force Airman 1st Class Austin Santrock, 325th Maintenance Squadron nondestructive inspection apprentice, uses a non-destructive testing industrial scanner at Tyndall Air Force Base, Florida, June 14, 2022. Airmen use NDT scanners to detect cracks or fissures in assets and equipment by emitting a vibration frequency, identifying a potential safety hazard or that an item is no longer serviceable. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1072

U.S. Air Force Staff Sgt. Brandon Tate, 325th Maintenance Squadron nondestructive inspection noncommissioned officer in charge, left, and Airman 1st Class Austin Santrock, 325th MXS NDI apprentice, review a work request receipt at Tyndall Air Force Base, Florida, June 14, 2022. The NDI flight receives assets and equipment from various units across the installation to maintain serviceability and check for functionality. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1055

U.S. Air Force Airman 1st Class Austin Santrock, 325th Maintenance Squadron nondestructive inspection apprentice, tests an oil sample at Tyndall Air Force Base, Florida, June 14, 2022. Airmen trained in the NDI flight utilize specific equipment to test oil and fuels samples to ensure and the substance is not contaminated and safe to use on the job. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1049

U.S. Air Force Staff Sgt. Alvinjason Aranda, 325th Maintenance Squadron nondestructive inspection craftsman, checks a piece of a firearm at Tyndall Air Force Base, Florida, June 14, 2022. Airmen trained in the NDI flight use black lights to detect cracks or breaks in pieces of equipment to save resources by determining what can be fixed in-house instead of sending assets off-base for repairs. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1014

U.S. Air Force Staff Sgt. Alvinjason Aranda, 325th Maintenance Squadron nondestructive inspection craftsman, checks a piece of a firearm at Tyndall Air Force Base, Florida, June 14, 2022. Airmen trained in the NDI flight use specialty magnets and black lights to find imperfections in pieces of equipment to save resources and protect the safety of users. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1012

U.S. Air Force Staff Sgt. Alvinjason Aranda, 325th Maintenance Squadron nondestructive inspection craftsman, checks a piece of a firearm at Tyndall Air Force Base, Florida, June 14, 2022. The NDI flight utilizes special tools and methods to detect faults in the physical integrity of assets and equipment to determine what can be fixed and what needs to be disposed of and replaced. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220614-F-YO405-1009

A U.S. Airman with the 325th Maintenance Squadron nondestructive inspection flight uses a black light on a piece of a firearm at Tyndall Air Force Base, Florida, June 14, 2022. The NDI flight specializes in detecting faults in assets and equipment to save resources and ensure the safety of service members on the job. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download

220609-F-YO405-1022

U.S. Air Force Staff Sgt. Jeydi Delgado, 325th Civil Engineer Squadron noncommissioned officer in charge of emergency management programs, looks at photos taken after Hurricane Michael at Tyndall Air Force Base, Florida, June 9, 2022. The installation did a comprehensive evaluation of policies and procedures to ensure disseminated information is current and accurate if Tyndall has to react to a severe weather situation. (U.S. Air Force photo by Staff Sgt. Magen M. Reeves)

Details Download